Dropout, Steel, SRAM UDH Flat Mount 140/160 Integrated, Eccentric special 30 sticks)

30 sticks)

2mm hole-to-hole

Thread: M12 x 1

The arced seatstay tab can be cut by the builder to accommodate angles up to 75 degrees

The bushing is a structural part of the assembly and must be silver brazed in Once installed it is not meant to be consumer serviced

Dropout, Steel, SRAM UDH Flat Mount 140/160 Integrated, Eccentric special 30 sticks)Material: 1018 steel, includes right and left frame components Application: SRAM Full Mount derailleurs and Universal Derailleur Hanger Meets all SRAM specs OD: 1 3 4" Flanges: Width: . 985" Symmetric seatstay flanges There is approximately 2 mm per side to make the weld with 3 4" chainstays and 5 8" seatstays Weld the tubes as far outboard as possible to avoid SRAM's clearance mask Caliper Mount: Flat Mount Integrated for 140mm (direct) or 160mm