Long Range Proximity Sensor - 8 mm Diameter, Shielded, Normally Open - NPN Wintriss Repair Parts -55 to 60 degrees C

-55 to 60 degrees C  Ambient operating humidity 5% to 85% Contact resistance*1 50µΩmax

and the film of dirty oil that forms on almost everything can affect sensors to the point where they will no longer operate

the arm drops onto the insulated pin below it

Must-release coil voltage  30% min

please read this Application Note about compatibility with the DSI 2

Long Range Proximity Sensor - 8 mm Diameter, Shielded, Normally Open - NPN Wintriss Repair Parts -55 to 60 degrees CThis long range 8 mm diameter shielded proximity sensor is Normally Open, in other words, it actuates (turns On) when metal enters the sesning field. This model features an extended 4mm range. This inductive proximity sensor has a threaded housing, and should be secured into an M8 x 1 threaded hole with thread locker. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bushing or insert. All of Wintriss's